U heeft gezocht op POE

Edgar A. Poe

Complete Tales and Poems of Edgar Allan Poe

Tales Of Terror From Edgar Allan Poe

Complete Stories and Poems of Edgar Allan Poe

Visions of Poe

Edgar Allan Poe

Edgar Allan Poe

The Illustrated Edgar Allan Poe

Complete Tales and Poems of Edgar Allan Poe

Leven van edgar allen poe

Verbeeldingswereld edgar allen poe

Edgar allan poe

Edgar allan poe

Edgar Allan Poe

POE H.264 2M Pan-Tilt IPCAM, Full HD, 4mm lens

De nieuwe Hi-PoE camera behuizingen zijn een optimale oplossing voor het plaatsen van IP cameras buitenshuis. Dankzij de voordelen van High Power PoE (Hi-PoE) is het nu mogelijk om zowel de camera als het verwarmingselement van spanning te voorzien via de

De nieuwe Hi-PoE camera behuizingen zijn een optimale oplossing voor het plaatsen van IP cameras buitenshuis. Dankzij de voordelen van High Power PoE (Hi-PoE) is het nu mogelijk om zowel de camera als het verwarmingselement van spanning te voorzien via de

Op 3 oktober 1849 werd Edgar Allan Poe, de grootste schrijver die Amerika ooit kende, meer dood d...

Dit boek van Edgar Allen Poe voor het eerst in een Nederlandse vertaling. Het is een essay over h...

he POE-1P is a gadget which can apply to passive PoE application. You can use it as PoE splitter or PoE injector as your need. It uses the power adapter that comes with your network device. There is no need for special PoE power adapter. It is recommended to use on G.DUO and AirMax5.

he POE-2P is a passive Power over Ethernet kit, including one passive splitter and one passive injector. It provides the most convenient and cost effective way for you to make PoE application, you do not worry about how to find power outlet when using AP or IPCam. It uses the power adapter that comes with your network device. There is no need for special PoE power adapter.

The AirLive POE-48TU is a Power over Ethernet Splitter with switchable output; it can split data and power from PoE Switch or PoE Injector. It provides 4-segment voltage selection, you can dip to required voltage according to your network device
s power input and compatible with IEEE 802.3af standard. With usage of POE-48TU, it allows network devices to be placed in the outdoor or places which are difficult to deploy power source.

POE INJECTOR (GIGABIT ETHERNET) .

802.3AF POE RANGE EXTENDER FOR FE 802.3AF POE IN

The PoE Injector allows a PoE enabled NetBotz appliance to be used with a non-PoE ethernet switch.

Includes: Country-specific detachable power cord

- Reduced installation costs
- Support for Axis PTZ and PTZ dome network cameras
- IEEE 802.3at compliance
- IEEE 802.3af compliance

Axis High Power over Ethernet midspans and splitters offer an easy, fast and cost-effective solution for powering network video products - specifically PTZ (pan/tilt/zoom) and PTZ dome network cameras - without the need to install power outlets and electrical cabling.


Axis High Power over Ethernet (High PoE) midspans and splitters enable Axis network video products to receive data and power over the same Ethernet cable.

The High PoE products make it easier to install network video products in areas where power cabling and outlets are unavailable. Installation costs are thus reduced.

The midspans and splitters conform to the IEEE 802.3at for powering devices with high power requirements on a network. The midspans are also IEEE 802.3af compliant, which means that they can be used with all Axis network video products with built-in PoE support.

The function of a midspan is to inject power into a network cable. A splitter, which separates data and power coming over an Ethernet cable, is used for a network video product without built-in support for PoE.

The PoE daughter cards can be installed on select 10/100 and 10/100/1000 Ethernet switching modules in the field to upgrade the Ethernet switching modules to provide inline power for IP phones and other devices.

- PoE/PoE+ compatible
- For Gigabit and Fast Ethernet connections

De DWL-P200 PoE-adapter is ontworpen om werkingsstroom te leveren aan draadloze LAN-toestellen zoals toegangspunten, bruggen en routers. Het maakt het mogelijk dat de stroom over de ethernet netwerkkabel gaat, waardoor het niet langer nodig is om een stroomtoevoer rechtstreeks op het draadloos LAN-toestel aan te sluiten.

Vergemakkelijkt de installatie
Met de PoE kunt u het draadloos LAN-toestel installeren op een dak, op of in de buurt van een plafond, of andere plaatsen waar de stroom niet eenvoudig toegankelijk is. Het is de bedoeling de bruikbaarheid van uw draadloze LAN te verhogen, zodat de verbinding met gebruikers mogelijk wordt, ongeacht hun nabijheid bij een stekker of een netwerkkabel.

Data en DC-stroomtransmissie op dezelfde netwerkkabel
Op een standaard UTP Cat.5 kabel, slechts twee paren (pinnen 1, 2, 3 en 6) worden gebruikt voor ethernet data-overdracht. PoE is bedoeld om voordeel te halen van de ongebruikte pinnen van het resterende kabelpaar. Bijgevolg zals een enkele Cat.5 kabel nu zowel ethernet-data als DC-voeding dragen. De bedoeling bestaat erin de locatie op afstand van stroom te voorzien en te voldoen aan de vereisten van ethernetverbinding via een enkelvoudige Cat.5 kabel.

Basiseenheid en terminaleenheid
De DWL-P200 omvat een basiseenheid en een terminaleenheid. Aan de ene zijde voert de basiseenheid het gelijkstroomvoltage in de ongebruikte kabels (pinnen 4, 5, 7 en 8) van de netwerkkabel. Aan de andere zijde, splitst de terminaleenheid de data en gelijkstroom op. Datasignalen gaan verder op de resterende netwerkkabels, terwijl gelijkstroom wordt gevoerd in de stroomadapter, die op een wisselstroomstekker verbonden is.

EPE-5818Gaf adopts LTC4263 in which with the functions of Power over
Ethernet and Power Sourcing Equipment. It is compliant with 802.3af PoE
solution, and supports Gigabit Ethernet. EPE-5818Gaf can easily extend the wired connection distance through the Ethernet cable and provide big
bandwidth for heavy data transmission.

EPE-5818Gaf offers 48V/0.375A power supply with standard pin definition of Ethernet cable. Pin#1,2,3,6 with data transmission and pin#4,5,7,8 with power enabled to device. By sending 48V, Ethernet terminals such as wireless LAN access point, IP phone, web camera and so on are powered remotely. It is especially designed for outdoor networking facility and low density installations.

Features and benefits

Cost-effective:
Cost-effective provides cost-effective power distribution for wireless LAN (WLAN) access point installations where a multiport Power over Ethernet (PoE) switch is not needed

IEEE 802.11n ready
: Gigabit Ethernet data transmission supports the entire line of HP E-series access points, including the three spatial stream IEEE 802.11n HP E-MSM460/MSM466 Access Points

HP Single-prt 802.3af Gig PoE In-line PS

HP Single-prt 802,3af Gig PoE In-line PS Europe - English Local EMEA

ProCurve Single-port 802.3af PoE In-line PSU

HP Single-port 802.3af PoE In-line PS

Mid-span PoE injector. Uitgangs vermogen: 15,4. Eenh. 1 stk

Compact single port, 802.3af compliant, midspan Gigabit PoE Injector
- Single port midspan PoE injector with Gigabit support
- Compliant to IEEE 802.3af
- Auto-detection of PoE devices
- Power feeding up to 100m via LAN cable
- Integrated wide range power supply
- Easy Plug & Play Installation

The midspan injector is ideally suited for connecting high throughput 802.11n based access points such as L-310agn and L-305agn to legacy Ethernet infrastructure. This saves costs especially in smaller networks. The LANCOM GE PoE Injector features a standard auto- sensing algorithm and provides safe power to remote terminals. Due to the integrated wide range power supply the LANCOM
GE PoE Injector is a standalone product. Except for an IEC320 standard line cord no additional components are needed for powering the injector. Sliding rails allow stacking multiple injectors together side by side.

- Single port midspan PoE injector with Gigabit support;
- Compliant to IEEE 802.3af;
- Auto-detection of PoE devices;
- Power feeding up to 100m via LAN cable;
- Integrated wide range power supply;
- Easy Plug & Play Installation.
The midspan injector is ideally suited for connecting high throughput 802.11n based access points such as L-310agn and L-305agn to legacy Ethernet infrastructure. This saves costs especially in smaller networks. The LANCOM GE PoE Injector features a standard auto- sensing algorithm and provides safe power to remote terminals. Due to the integrated wide range power supply the LANCOM GE PoE Injector is a standalone product. Except for an IEC320 standard line cord no additional components are needed for powering the injector. Sliding rails allow stacking multiple injectors together side by side.

Level One POS-1002 5V - 12V PoE Splitter

- Send data over your home existing electrical wiring
- Includes 1 PoE port for easy deployment of PoE devices
- No need to install expensive Ethernet cables
- Auto-discovery function to connect easily to other devices on the network
- Streams large HD files to other rooms

HomePlug Pro Series
The LevelOne HomePlug Pro Series
takes home networking to the next level. Following the HomePlug A/V standard, users will enjoy 200 Mbps throughput for all bandwidth-hungry applications, especially high-definition audio/ video.

HomePlug Pro PoE
Bringing Power over Ethernet to the Masses!
Usually Power over Ethernet is a feature only available to professional networking experts. But now end-users can take advantage of PLI-3110 as a professional PoE solution packed in a small device.

What is PoE?
Power over Ethernet allows data and power to be sent over a single Ethernet cable. This is especially useful for deploying surveillance cameras around the home or office. It
s easy to run a cable up high in the ceiling, but how are you supposed to send power to the device?

PLI-3110 is the solution as it follows the 802.3af standard, offering 15.4 Watts to any PoEcompatible device.

What if my device isn
t PoE compatible?
No problem! There are very few PoE compatible devices made for the home. Luckily all you need is a PoE splitter and you can place your network camera or VoIP phone anywhere within 100 meters of the LevelOne HomePlug Pro PoE.

- Up to 15.4W of PoE Power
- Safe on Low Power Devices - Receive Only the Power They Need
- Safe and Reliable Power to WLAN Access Points
- Automatic Detection and Protection of Non
standard Ethernet Terminals
- Supports 10/100/1000Base-T LAN environnements
- Unique interlocking feature for easy installation

Advanced PoE Solution
The LevelOne POI-2001 is a single port, PoE PSE solution for remote PoE PD devices. Generating up to 15.4W, the POI-2001 supplies remote power for new applications such as wireless access points, IP cameras and videophones. It complies with the IEEE 802.3af PoE standard.

It can work with 10/100Base-T networking devices and emerging 1000Base-T devices such as Wi-MAX and wireless IEEE 802.11n access points. With all the functions featured in POI-2001, people can get the benefit of flexible network installation at lower cost and less downtime. It also provides a high-bandwidth pipe to the network.

The POI-2002 is a Power over Ethernet Injector with one Ethernet Input (data only) port and one Output (data + power) port that is designed for small or medium network environments. This product can convert standard 100~240V/AC power into lowvoltage DC that runs over existing LAN cable to power up IEEE 802.3af compliant network accessories. It also features PoE awareness to verify whether the network device receiving power is IEEE 802.3af compliant, or only the data will be sent through LAN cable. By adding a PoE Splitter (POS-1002) to existing non-PoE networking equipment, installing networking products such as Access Points and IP cameras can easily be performed. Wireless device deployments are easily located without the need for power outlets and network administrators don
t need to use AC power adapters anymore.

Advanced PoE Solution
The LevelOne POI-3000 is a single port, high power PoE PSE solution for remote PoE PD devices. Generating up to 30W , POI-3000 supplies remote power for new applications such as wireless access points, pan-tilt-zoom (PTZ) IP cameras and videophones. It complies with IEEE 802.3at PoE standard and is backward to IEEE802.3af. It can work with 10/100Base-T networking devices and emerging 1000Base-T devices such as Wi-MAX and wireless IEEE 802.11n access points. For all the function featured in POI-3000, people can get the benefit of flexible network installation at lower cost, less downtime. It also provides a high-bandwidth pipe to the network.

- 12V DC / 2.5A High-Power PoE Splitter Module
- Power for IP Cam, IR LEDs, housing heater and
fan all from a single PoE cable
- Supports High-Power up to 30W
- For PoE and non-PoE Cameras
- All necessary accessories included
- Easy installation

For system integrators looking for a professional solution to help extend their PoE network, POR-0100 is the perfect accessory to increase your Power over Ethernet network performance. Normal cable runs only reach 100 meters, but with POR-0100 installers can extend the PoE network performance up to 200 meters!

Simple yet durable, no software required
As a PoE Repeater, POR-0100 receives all power from the Power Sending Equipment (PSE), for example, a PoE switch. This means that POR-0100 uses no external power supply, making it the most flexible option for system integrators looking for an easy, affordable solution to increase the distance to the attached devices. POR-0100 has 2 RJ-45 ports for easy deployment, the ?IN? port that accepts the power and data for the first 100 meters, and the ?OUT? port that boosts and extends the power and data an additional 100 meters. With a durable metal housing, POR-0100 fits into any tight deployments.

Applications
POR-0100 works great for large IP surveillance networks with many cameras deployed throughout a building or campus. It is also an ideal solution for outdoor access points that are located far from the network control center. POI-0100 can also work together with LevelOne? s high-power PoE injector, POI-4000. This can extend Ethernet connectivity an additional 100 meters for high power PD devices, such as 18 W IP Cameras or other devices that require power greater than 15.4 W.

Key Features:
- Extends Cat.5 cable installations to beyond 100 meters
- Forwards power over Ethernet ( PoE) to remote device
- No Power required
- Fully transparent-no restrictions to network traffic
- Simple to install-works instantly
- Supports all network devices Compatible with universal IEEE 802.3af PoE Standard

- Extends Cat.5 cable installations to beyond 100 meters
- Forwards power over Ethernet ( PoE) to remote device
- No Power required
- Fully transparent-no restrictions to network traffic
- Supports all network devices
- IP-66 weatherproof design

Extend the reach of your PoE devices
POR-1100 is the perfect accessory to increase your Power over Ethernet network performance. Normal cable runs only reach 100 meters, but with POR-1100 installers can extend the PoE network performance up to 200 meters!

Simple yet durable, no software required
As a PoE Repeater, POR-1100 receives all power from the Power Sending Equipment (PSE), for example, a PoE switch. This means that POR-1100 uses no external power supply, making it the most flexible option for system integrators looking for an easy, affordable solution to increase the distance to the attached devices.

Applications
POR-1100 is the perfect solution for taking Ethernet to areas such as roof tops, factory floors, airports manufacturing plants, and large warehouses.

IP-66
The POR-1100 is compliant to IP-66 weather proof from snow, rain, typhoons, desert heat, etc. This PoE Repeater PRO-1100 is up to the challenge for deployment in any harsh weather condition.

POI-1100 can also work together with LevelOne
s high-power PoE injector, POI-4000. This can extend Ethernet connectivity an additional 100 meters for high power PD devices, such as 18 W IP Cameras or other devices that require power greater than 15.4 W.

Advanced PoE Solution
The LevelOne POS-1001 Gigabit PoE Splitter splits a networked PoE Signal into separated power and Gigabit data sources. This device allows administrators to run Gigabit speed PoE cables over long distances and then split the PoE signal into separated data and power sources in order to network non-PoE devices. Active splitters are aslo available in the following output voltages (5V or 9V or 12V). Save installation and equipment cost when installing 802.11n access points, (Pan/Tilt/Zoom) IP cameras and more in remote locations. No need to install network devices near a power outlet. This compact device safeguards valuable network equipment with short circuit protection and quickly creates an integrated PoE and non PoE network at Gigabit speeds.

- IEEE 802.3af compliance
- Converts non-PoE devices with Power over Ethernet support
- Adjustable output DIP switch for 5V, 9V, and 12V adjustable output
- Delivering power and data to equipment via a single Ethernet cable
- Eliminates the need for a bulky power adapter and power line for your appliance
- Compatible with Wireless Router, AP, Network Camera, Print server, Converter
- Light weight and compact size
- Provides interchangeable tips

The LevelOne POS-1002 PoE Splitter splits a networked PoE signal into separate power and Fast Ethernet data sources. This device allows administrators to run Fast Ethernet speed PoE cables over long distances and then split the PoE signal into separate data and power sources in order to network non-PoE devices. This active PoE splitter is available in the following output voltages (5V or 9V OR 12V). Save installation and equipment cost when installing access points, IP cameras and more in remote locations With no need to install network devices near a power outlet. This compact device safeguards valuable network equipment with short circuit protection and quickly creates an integrated PoE and non PoE network at Fast Ethernet speeds.

- Network devices at Gigabit speeds all within a compact device
- Automatically detects PoE terminals and supplies inline power
- Easily install non-PoE devices where a power outlet is not available
- Reduce installation and network equipment costs
- Safeguards network device with short circuit protection
- Adjustable output DIP switch for 5V, 9V, and 12V adjustable output
- Converts Non-PoE devices with Power Over Ethernet Support
- Auto-sensing power drawn from 802.3af / 802.3at power source equipment(PSE) devices
- Supplies power up to 25 watts
- Provides Interchangeable tips

Advanced PoE Solution
The LevelOne POS-3000 Gigabit High Power PoE Splitter splits a networked PoE Signal into separated power and Gigabit data sources. This device allows administrators to run Gigabit speed PoE cables over long distances and then split the PoE signal into separated data and power sources in order to network non-PoE devices. Active splitters are aslo available in the following output voltages (5V or 9V or 12V). Save installation and equipment cost when installing 802.11n access points, (Pan/Tilt/Zoom) IP cameras and more in remote locations. No need to install network devices near a power outlet. This compact device safeguards valuable network equipment with short circuit protection and quickly creates an integrated PoE and non PoE network at Gigabit speeds.

- Two-wire cables are used to connect 100Mbps Fast Ethernet PoE devices
- Maximum distance up to 400 meters for 24 AWG cable
- Maximum data rate up to 60 Mbps full duplex
- Remote PoE capability for PD devices of WiFi AP, IP camera, IP telephones
- Up to 15 Watts for remote PoE, Depending on PSE power
- Easy installation by indoor & outdoor different models
- Dip Switches for 2-wire line rate settings
- Auto MDIX for 10/100 Base T Ethernet LAN Ports
- Low-Latency for Video/Voice/Data applications

The POT system, one master & one slave units, provide a long-reach Ethernet extension with remote Powerover-Ethernet (PoE) capability over a 2-wire line. Connection with a Class 0 PD device, the distance of two-wire 24AWG cables can be up to 400 meters when using a 48Watt high power PoE Switch, FSW-0513/0543. Users may select a fixed data rate for different copper line ranging. The maximum data rate can be up to 60 Mbps full duplex for 2-wire line.

The POT master unit is powered by the local PoE Ethernet network, and transmits both the data and power to the remote slave unit over 2-wire cable. The remote unit regenerates the power and provides the PoE capability to power up the remote PD device up to 15 watts when connecting to 48Watt High Power Switch, FSW-0513. The POT M/S supports the indoor & outdoor models with wall-mount feature.

Equipped with dip switches, the 2-wire line speed can be configured to meet different line gauges and distances. A POT pair offers a cost effective solution for remote power applications such as LAN-to-LAN connectivity, Video Streaming, FTTB, and MDU/MTU over single twisted line.

The PowerDsine 9501G is a single port, high-power solution for remote powering of current and emerging high power applications.

Generating a maximum of 60W, the PD-9501G enables remote power for a new range of applications including pan-tilt-zoom (PTZ) cameras, video-phones and thinclients. It complies to IEEE 802.3af/at PoE standard parameters, while doubling the available power. It can power both existing 10/100Base-T network devices and such emerging wireless gigabit devices as Wi-MAX and remote distance wireless IEEE 802.11n access points.

SonicWALL PoE Injector 802.3AF Gigabit N [01-SSC-5544] - for use with SonicWALL SonicPoint-N Wireless.

This item is also compatible for the older SonicPoint & SonicPoint G, the non-Gigabit version being 01-SSC-5535 that is no longer available.

The POESPLT100 10/100 Mbps PoE Power over Ethernet Splitter with 5-12V Output separates the data and power connections received from your Power Sourcing Equipment(PSE) such as a single port PoE injector or a PoE Switch.

At the remote end of your PoE connection, the POESPLT100 gives you a standard DC jack with selectable 5, 7.5, 9 or 12V output and separates the Ethernet data connection allowing you to take advantage of Power over Ethernet infrastructure, and use a variety of peripherals in places where no wall outlet exists.

Geen stopcontact in de buurt waarop u uw PoE (Power over Ethernet) apparatuur kunt aansluiten? Geen nood, TP-Link heeft met de TL-PoE150S de oplossing. Hiermee kunt u uw PoE apparatuur, zoals VoIP telefoons, access points en IP camera
s, van stroom voorzien. De TL-PoE150S levert stroom over UTP (netwerkkabel) tot 100 meter.

The Gigabit Power over Ethernet Injector (TPE-111GI) combines electrical power with a Gigabit network data signal to product a Gigabit Power over Ethernet (PoE) signal.

Connect this device to a non-PoE switch and then run a Gigabit PoE cable for up to 100 meters (328 Ft.) to network most PoE devices.

No need to buy a PoE switch
use existing open ports from a non-PoE switch to network PoE devices. Save installation and equipment cost when installing TRENDnet PoE access points and IP cameras in remote locations. No need to install PoE devices near a power outlet. This compact device safeguards valuable network equipment with short circuit protection. Quickly create an integrated PoE and non-PoE network at Gigabit speeds.

The Gigabit Power over Ethernet Splitter (TPE-112GS) splits a networked PoE signal into separate power and Gigabit data sources.

This device allows administrators to run Gigabit speed PoE cables over long distances and then split the PoE signal into separate data and power sources in order to network non-PoE devices.

Save installation and equipment cost when installing access points, IP cameras and more in remote locations. No need to install network devices near a power outlet. This compact device safeguards valuable network equipment with short circuit protection. Quickly create an integrated PoE and non PoE network at Gigabit speeds.

Y-Cam Black SD PoE IP camera [Nightvision, MicroSD, PoE]

Y-Cam White S PoE IP camera [Power-over-Ethernet]

Power over Ethernet Empowerment
ZyXEL PoE-12 is a single-port Power over Ethernet (PoE) Injector that infuses and transmits electricity through unused pairs (4/5 and 7/8) in CAT-5 Ethernet cables, while data flows are carried by the other pairs (1/2 and 3/6). As such both power and data can be delivered to PoE devices (PD) via a single CAT-5 Ethernet cable without extra power supply.

Hassle-free Installation
With the PoE-12, non-PoE switches can now power IEEE802.3af compliant PoE devices through an effective single CAT-5 Ethernet cable link up to 100m in length.

In other words, users can install any IEEE 802.3af compliant PoE devices like WLAN access points or IP surveillance cameras with more freedom. Unlike traditional solutions, the PoE-12 can now take advantage of the effortless connectivity in challenging places, such as ceiling or top of wall, without laying power cables. It means that the devices are now untied from power outlets for maximum flexibility.

The PoE-12 is easy to use and needs no configuration. Since only simple inbound and outbound cable plugging is required, installation is straightforward and can be performed by users without power cabling expertise or expense.

Draadloos-G Access Point PoE

xStack 24-poorts PoE Gigabit L2+ stapelbare switch met vier slots voor SFP- of 10GbE-modules

Catalyst 3750-E 24-Port Multi-Layer Ethernet Switch w/ PoE

48-port Switch Catalyst 3750E 10/100/100 PoE

Catalyst 3750-E 48-Port Multi-Layer Ethernet Switch w/ PoE

Catalyst 3560-E 24-Port Multi-Layer Ethernet Switch w/ PoE

48-Port Multi-Layer Ethernet Switch Catalyst 3560-E w/ PoE

Catalyst 3560-E 48-Port Multi-Layer Ethernet Switch w/ PoE

Catalyst 3560-E 48-Port Multi-Layer Ethernet Switch w/ PoE

ProSafe 24-poorts 10/100 Smart switch met 2 Gigabit poorten en PoE

Cisco Catalyst 4500 1400 WDC Power Supply with PEM (PoE)

10/100TX x 48 ports PoE stackable Fast Ethernet switch with 2 combo ports

48-Port Gigabit Switch: PoE

24 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port has one 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active), 8 PoE Ports, 1 RU fixed-configuration, LAN Lite Image installed

48-Port 10/100 Ethernet Switch: PoE

48-Port Gigabit Switch: PoE

Catalyst 4500 6000 WAC Power Supply (PoE), Spare

HP A5120-24G-POE SI SWITCH CPNT

DWL-3200AP 108 Mbps managed draadloos Access Point met PoE-ondersteuning

11g access point met PoE voor zakelijke gebruikers

Draadloos-G Access Point PoE

PoE Wireless-G Access Point

-

-

Teaching at the Intersection of Faith and Learning.<BR>Every day, in colleges and universities all around the world, professors of everything from philosophy to geology offer their students a perspective on the world around them. According to Harry L. Poe, Christian professors must 'join the conversation.' They must not be afraid to teach their chosen subjects in a way that integrates and upholds a faith perspective. With Christianity in the Academy, Poe offers practical advice that will aid faculty in accomplishing this goal. This book will be extremely helpful to Christian teachers at both Christian and secular schools as well as administrators and supporters of church-related colleges.<BR>'Poe reviews with acuity and economy the scholarly research and literature on approaches, strategies, and experiments in the field. He provides a superb directory of Christian academic and professional societies and offers thoughtful engagement with the potential and future of Christian colleges.' - David Lyle Jeffrey<BR>Recommended € 22,90<BR>

Van Poe tot Pooh

Edgar Allan Poe / druk 1

-

Sta stil bij 200 jaar Poe in deze ijskoude thriller. De meester van de griezeligheid, Edgar Allan Poe, neemt je mee op een duistere trip om eindelijk het mysterie rondom zijn eigen dood op te lossen. Als een beroemde schrijver van mysteries op zoek naar een volgend geruchtmakend verhaal, krijg je van een onbekende bezoeker de perfecte zaak aangereikt om je carriere weer op het juiste spoor te zetten. Je verzamelt aanwijzingen, interviewt getuigen en probeert de verschillende puzzelstukken van de samenzwering achter de dood van een van de grootste Amerikaanse schrijvers allertijden. Wie doodde Edgar? Je krijgt 24 uur de tijd en verschillende verhalen aangereikt vanuit het oude graf om je te helpen als je het verhaal achter de dood van Edgar Allan Poe ontrafelt.

-

Everything Edgar Allan Poe Book

Yoeng poe tsjoeng

You poe toean

Van edgar allen poe tot dashiell hammett

-

-

-

-

-

Features:

- Flat non-invasive design.
- Progressive scan.
- Power over Ethernet.
- Easy installation.

Discreet, non-invasive video surveillance

AXIS 209FD is a fixed dome network camera designed for discreet indoor video surveillance. The non-invasive design makes it the perfect choice for locations such as shops, hotel receptions and corridors.

Compact and discreet design

AXIS 209FD with its flat, compact design offers flexible video surveillance solutions for environments where discreet monitoring is preferred. Measuring only 4 cm (1.6 inches) in height, AXIS 209FD is discreet and takes up a minimum of space. All parts of the cameras have been optimized to create a flat design.

Easy installation

Easy installtionAXIS 209FD is quick and easy to install. Its design allows tilt of the lens and horizontal camera adjustment, offering flexible installation on ceilings or walls. Equipped with Power over Ethernet (PoE) support, the camera uses the Ethernet cable for both power and video, simplifying installation by eliminating the need for power outlets at the camera locations.

Features:

- Flat non-invasive design.
- Megapixel resolution.
- Progressive scan.
- Power over Ethernet.
- Easy installation.

Excellent image detail

Excellent image detail for identification of individualsAXIS 209MFD is a megapixel fixed dome network camera, featuring a 1.3 megapixel sensor that delivers excellent image detail, perfect for the identification of individuals and objects of interest. The megapixel resolution allows important areas like entrances or checkouts to be monitored in greater detail.

Discreet, non-invasive video surveillance

Flat, compact design for discreet surveillanceAXIS 209MFD is a flat, discreet network camera designed specifically for non-invasive video surveillance. It is is ideal for areas such as hotel receptions, shops and corridors.

Easy installation

AXIS 209MFD is quick and easy to install. Its design allows tilt of the lens and horizontal camera adjustment, offering flexible installation on ceilings or walls. Equipped with Power over Ethernet (PoE) support, the camera uses the Ethernet cable for both power and video, simplifying installation by eliminating the need for power outlets at the camera locations.

Ultra-discreet fixed dome model Progressive scanMeerdere H.264 streamsEenvoudige installatiePower over EthernetGeavanceerde security en netwerk managementInnovatief, uniek camera ontwerpDe AXIS M3011 Fixed Dome Network Camera is een ultra compacte fixed d

Ultra-discreet fixed dome model Progressive scanMeerdere H.264 streamsEenvoudige installatiePower over EthernetGeavanceerde security en netwerk managementInnovatief, uniek camera ontwerpDe AXIS M3014 Fixed Dome Network Camera is een ultra compacte fixed d

De AXIS P3304 Network Camera is ontworpen voor gebruik binnenshuis waar een compacte en discrete oplossing verlangd wordt. De camera biedt superieure video kwaliteit in HD720 of 1 Megapixel resoltie en biedt meerdere, gelijktijdige efficente H.264 streams

De AXIS P3304-V Network Camera is ontworpen voor gebruik binnenshuis waar een sabotagebestendige, compacte en discrete oplossing verlangd wordt. De camera biedt superieure HD720p of 1 Megapixel video kwaliteit in meerdere, gelijktijdige efficiente H.264 s